Lidt hjælp
-
Febbe
- Indlæg: 157
- Tilmeldt: tirs 29. jan 2019 11:42
- Diagbox: Ja
- Version: 7.62
- Kontakt:
Lidt hjælp
Nr. 11, er det en pakning, har haft skiftet bag cylinder manchet og er nu blevet utæt. Ikke så god til engelsk.
Du har ikke tilladelse til at få vist vedhæftede filer i dette indlæg.
Citroën c4 coupé 3 dør’s 2.0 16v vtr 2007
- zitrosan
- Indlæg: 48
- Tilmeldt: søn 26. feb 2017 18:38
- Kontakt:
-
Febbe
- Indlæg: 157
- Tilmeldt: tirs 29. jan 2019 11:42
- Diagbox: Ja
- Version: 7.62
- Kontakt:
- zitrosan
- Indlæg: 48
- Tilmeldt: søn 26. feb 2017 18:38
- Kontakt:
-
denelias
- Indlæg: 535
- Tilmeldt: lør 13. jul 2019 21:57
- Geografisk sted: Albertslund
- Diagbox: Ja
- Kontakt:
-
cit-rotti
- Indlæg: 213
- Tilmeldt: ons 26. dec 2018 17:36
- Geografisk sted: Deutschland Würzburg
- Diagbox: Ja
- Version: 9.222+ ältere
- Kontakt:
Re: Lidt hjælp
There are seals in the spring cylinder - these are numbers 7/8/9
These must be changed if the car does not maintain height when it is parked. Or if additional LDS also flows into the rubber bellows and from there into the axle tube.
Before this, the returns can be used to determine which spring cylinder is affected.
Depending on the version, there are different spring cylinders. The high-pressure connections (3.5 or 16 mm) can be different and also the diameter of the piston in the spring cylinder (37 or 40 mm).
The sealing ring of the spring ball no. 6 can also leak very rarely.
A specific assignment is only possible via the chassis number (VIN) and via the chargeable service hotline.
If you write me the chassis number, I can look up the spare part numbers for you and it is necessary to describe the problem specifically.
Greetings Wolfgang
These must be changed if the car does not maintain height when it is parked. Or if additional LDS also flows into the rubber bellows and from there into the axle tube.
Before this, the returns can be used to determine which spring cylinder is affected.
Depending on the version, there are different spring cylinders. The high-pressure connections (3.5 or 16 mm) can be different and also the diameter of the piston in the spring cylinder (37 or 40 mm).
The sealing ring of the spring ball no. 6 can also leak very rarely.
A specific assignment is only possible via the chassis number (VIN) and via the chargeable service hotline.
If you write me the chassis number, I can look up the spare part numbers for you and it is necessary to describe the problem specifically.
Greetings Wolfgang
-
cit-rotti
- Indlæg: 213
- Tilmeldt: ons 26. dec 2018 17:36
- Geografisk sted: Deutschland Würzburg
- Diagbox: Ja
- Version: 9.222+ ältere
- Kontakt:
-
Febbe
- Indlæg: 157
- Tilmeldt: tirs 29. jan 2019 11:42
- Diagbox: Ja
- Version: 7.62
- Kontakt:
Re: Lidt hjælp
Tænker det måske er blevet “slapt”, så har bestilt et nyt ved Citroën.
Citroën c4 coupé 3 dør’s 2.0 16v vtr 2007
-
Febbe
- Indlæg: 157
- Tilmeldt: tirs 29. jan 2019 11:42
- Diagbox: Ja
- Version: 7.62
- Kontakt:
Re: Lidt hjælp
Prøver lige med et nyt spændebånd.cit-rotti skrev: ↑fre 23. jun 2023 12:39There are seals in the spring cylinder - these are numbers 7/8/9
These must be changed if the car does not maintain height when it is parked. Or if additional LDS also flows into the rubber bellows and from there into the axle tube.
Before this, the returns can be used to determine which spring cylinder is affected.
Depending on the version, there are different spring cylinders. The high-pressure connections (3.5 or 16 mm) can be different and also the diameter of the piston in the spring cylinder (37 or 40 mm).
The sealing ring of the spring ball no. 6 can also leak very rarely.
A specific assignment is only possible via the chassis number (VIN) and via the chargeable service hotline.
If you write me the chassis number, I can look up the spare part numbers for you and it is necessary to describe the problem specifically.
Greetings Wolfgang
Citroën c4 coupé 3 dør’s 2.0 16v vtr 2007